Multi-Function Switch - BOMBARDIER 2006 outlander max 400 Operator's Manual

WARNING
Before moving vehicle in reverse,
ensure the path behind is clear of
obstacles or bystanders. Remain
seated.
N: Neutral
This position disengages the transmis-
sion to allow manual vehicle move-
ment.
H: High gear
This selects the high speed range of
the transmission in the gear box. It is
the normal driving speed range. It al-
lows the vehicle to reach its maximum
speed.
L: Low gear
This selects the low speed range of
the transmission in the gear box. It
is the working position. It allows the
vehicle to move slowly with the maxi-
mum traction and power.
NOTE: Use the low speed range to
pull any load or to climb a steep incline.

6) Multi-Function Switch

The multi-function switch is located on
the left side of handlebar.
V07I02Y
TYPICAL
1. Multi-function switch
The controls located on this multi-
function switch are:
1
Headlamp Switch
Located on the top of multi-function
switch. Place headlamp switch to LO
for the low beam and taillight. Place
headlamp switch to HI for the high
beam and taillight.
V07I03Y
TYPICAL
1. Headlamp switch
2. Low beam position
3. High beam position
NOTE: Place ignition switch to ON
"without light" position to close the
headlamp.
vmo2006-005-013_a
IGNITION SWITCH
1. ON "without light"
2. ON "with light"
_____________________
3 2
1
2
1
87