Table of Contents
Advertisement
5) Multi-Function Switch
The multi-function switch is located on the left
side of handlebar.
1
V02I0WY
1. Multi-functions switch
Headlamp Switch
Located on the top of multi-function switch.
Place switch to LO for the low beam and tail-
light. Place switch to HI for the high beam and
taillight. To close headlamp, move the head-
lamp switch to OFF position.
1
V02I03Y
1. Headlamp switch
Engine Stop Switch
Located at the middle of multi-function switch.
The engine will not run or start if the engine
stop switch is turned to OFF position.
This switch is used to stop engine and as an
emergency control.
NOTE: While engine can be stopped by turn-
ing ignition key OFF, we recommend the en-
gine be stopped by the engine stop switch.
1
V02I03Z
1. Engine stop switch
Start Button
Located under engine stop switch. To start en-
gine:
– Place the engine stop switch to RUN.
– Select transmission to the NEUTRAL po-
sition or squeeze the clutch lever.
– Turn ignition key to ON.
– Press and hold the start button.
Release immediately after engine is started.
1
V02I03O
1. Start button
63
Hide quick links:
Advertisement
Table of Contents
