On-Screen Warnings; On-Screen Function Fields - GRAUPNER mx-16 HOTT Programming Manual

On-screen warnings

Warnings
"Binding not present"
No receiver is bound to the
BIND N/A
currently active model mem-
OK
ory. A brief touch of the
button takes you directly to the
corresponding option.
RF ON/OFF? Do you want the RF signal to
ON OFF
be "ON" or "OFF?
batter y
Battery must be charged
needs
Operating voltage too low
charging
fail safe
setup Fail-Safe not yet set up
t.b.d
MISSING
No suitable voice files found
IMPORT
DATA
on the memory card
OK
The throttle stick (or helicopter
throttle
too
limiter) is set too far in the
high !
direction of full-throttle
Request to switch off the RF
RF section
MUST BE
(voice files can only be loaded
OFF
with the RF section switched
OK
off)
CAN'T
RECEIVE
No bound receiver in range.
DATA
OK
36 Description of transmitter - On-screen warnings and function fields
no
No connection between
student
Teacher and Pupil transmitters
signal
No SD or SDHC memory card
SD-CARD
SET
INSERT in the card slot, or card cannot
OK
be read.
TRAINER
Wireless Link
ACT
A "wireless Trainer connection" was used before the
transmitter was last switched off; do you wish that con-
nection to be continued (ACT), or switched OFF (INH)?

On-screen function fields

SEL, STO, SYM, ASY,
The bottom line of the screen displays function fields
which vary according to the menu selected.
The function fields are activated by touching the
INH
button.
Function fields
• SEL
select
• STO
store (e. g. transmitter control position)
• SYM
• ASY
•
•
,
SEL STO SYM ASY
SET
adjust values symmetrically
adjust values asymmetrically
Switch symbol field
(assigning switches of all kinds)
Switch to second page (next menu)
within a menu