GRAUPNER mx-16 HOTT Programming Manual page 95

will find in the "Transmitter control settings" menu as
"Control 9" and "Control 10", provide a centre position in
addition to the two end-points.
Simultaneously pressing the  or  buttons of the
right-hand touch-key (CLEAR) with the switch assign-
ment activated - see illustration above - resets the input
to "free".
Tips:
• When assigning the switches please take care to set
them to the appropriate direction of travel, and en-
sure that all inputs not required are left at or set to
"free", to eliminate the possibility of errors if unused
transmitter controls are operated accidentally.
• You can alter the effective end-points of an assigned
switch by adjusting servo travel, as described in the
next section.
The screen now displays either the transmitter control
number or the switch number, followed by a switch sym-
bol which indicates the direction of operation, e. g.:
I5 3 +100% +100%
I6 ctrl 7 +100%
I7 free +100% +100%
I8 free +100% +100%
tr v
Column 3 "-Travel+"
In this column the transmitter control can be adjusted
symmetrically or asymmetrically, i. e. different to either
side. The available range is +/-125% of the normal servo
travel.
Use the arrow buttons  of the left or right-hand
touch-key to select one of the inputs 5 to 8.
If you wish to set up symmetrical travel, i. e. the same in
both directions, move the associated transmitter control
(rotary proportional controls CTRL 6 ... 8 or switches
4/5 and 6/7) to a position at which the marking frame
encloses both sides of the travel setting:
I5
I6
I7
I8
If you wish to set up asymmetrical travel, i. e. different for
both directions, move the associated transmitter control
+100% (rotary proportional control or switch) to a position at
which the marking frame encloses the side of the travel
setting you wish to change:
I5
+
I6
I7
I8
Touch the central
to activate the value setting; the value field is now shown
highlighted. Use the arrow buttons of the right-hand
3 +100% +100%
ctrl 7 +100% +100%
+100% +100%
free
free +100% +100%
+
tr v
3 +100% +100%
ctrl 7 +100% +100%
free +100% +100%
free +100% +100%
+
tr v
SET button of the right-hand touch-key
Program description: transmitter control settings - fixed-wing model
touch-key to alter the values:
I5 3 +100% +100%
I6 ctrl 7 +111% +111%
I7 free +100% +100%
I8 free +100% +100%
tr v
I5
3 +100% +100%
I6 ctrl 7 +88%
I7 free +100% +100%
I8 free +100% +100%
tr v
SET
Touch the central button of the right-hand touch-key
to conclude the input process.
Negative and positive parameter values are possible;
this enables you to set the appropriate direction of
movement of the transmitter control or its direction of
effect to suit your model.
Simultaneously pressing the arrow buttons  or 
of the right-hand touch-key (CLEAR) resets the altered
parameter in the highlighted input field to +100%.
Important:
In contrast to servo travel adjustments, changing the
transmitter travel setting affects all mixer and coupling
inputs derived from it, i. e. in the final analysis all the
servos which can be operated using the associated
transmitter control.
+
+111%
+
95