GRAUPNER mx-16 HOTT Programming Manual page 163

Time
RFID ABCDEF12
firmware ver.
2011/03/11
date
time 11:22:33s
SD-CARD
If necessary, you can select this line, and the minutes
field, using the arrow buttons of the left or right-hand
touch-key. A brief press on the central
right-hand touch-key activates the corresponding value
field, and you can then adjust the hours or minutes
using the arrow buttons of the right-hand touch-key. A
further brief press on the central SET
hand touch-key concludes the entry process.
Note that the seconds display cannot be set directly;
instead it can be reset to "00" with a touch of the central
SET button of the right-hand touch-key.
Notes:
• The date and time of day can also be set using the
PC program available for the corresponding product
on the Internet at www.graupner.de; this requires that
the transmitter should be connected to a PC in the
appropriate manner.
• The date and time are protected from data loss due
to power failure - for example, when the battery is
swapped - by a user-replaceable buffer battery.
SD card
RFID
1.11 firmware ver.
(FRI) date
time
0MB SD-CARD
This line displays the storage capacity in MB of a
memory card installed in the transmitter.
SET button of the
Depending on the memory capacity of the micro-SD
or micro-SDHC memory card fitted in the transmitter,
it may take several minutes for the display to show the
correct value after you switch the transmitter on.
button of the right-
available
firmware ver.
date
time
SD-CARD
available
Display of the available memory in MB.
As already mentioned, it may take a certain amount of
time for the available memory to be displayed after you
switch the transmitter on, depending on the total capac-
ity of the installed memory card.
The next line down displays the available memory in
relation to the total memory capacity:
ABCDEF12
1.234
2012/03/01(THU)
11:22:33s
2048Mb
As already mentioned, it may take a certain amount of
time for the available memory to be displayed after you
switch the transmitter on, depending on the total capac-
ity of the installed memory card.
1.234
2012/03/01(THU)
11:22:33s
2048Mb
1234Mb
date 2012/03/01(THU)
time 11:22:33s
SD-CARD 2048Mb
available 1234Mb
60%
Program description: Info display 163