Oki Teriostar LP-1030 User Manual page 96

System Menu
T
Chapter
1
Chapter
2
Chapter
3
Chapter
4
n
Chapter
5
96
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
y
Port
Enabled when On by Port is selected in operation TRAP ** job. The setting can also
be enabled. After printing is completed, a trap is sent to the TRAP Agent Computer
for all jobs sent to the Printer port that is specified here.
<Parameter by selecting options>
All
n
Port 01 to 10
z
ActiveDirectory Settings option available only in Japan
y
DC Addresses 1 to 3
y
DC Access Login Name
y
DC Access Password
Note
Do not change these settings.
‹
The printer may not operate correctly if these settings are changed.
Scanner
MF
z
TWAIN Port Address
Sets the command port (TCP) for TWAIN driver connection.
<Parameter by entering numbers>
0 to 65535
z
TWAIN Data Port Address
Sets the data port (TCP) for when the TWAIN driver is used for connection.
<Parameter by entering numbers>
0 to 65535
: Default value
n
Default value: 30000
Default value: 32000