Oki Teriostar LP-1030 User Manual page 205

(1) (2) (3) Message
W OM 4750 Receive message error from
TWAIN
W OM 4800 Send message error
W OP EF00
W PD A300 FORMATERROR
W PD A401 COMMAND ERROR
W PD A402 # OF PARAM. ERROR
W PD A403 PARAM._RANGE_ERR
W PD A405 UNDEFINED COMMAND
W PD A407 POLYGON_BFFR_ERR
W PD A408 DATA IGNORED
W PD A500 PATTERN OVERFLOW
W PD A501 HATCH OVERFLOW
W PD A502 KANJI OVERFLOW
W PD A503 CHAR._OVERFLOW
W PD A504 VMS OVERFLOW
W PD A505 SPOOL OVERFLOW
W PD A506 POLYGON OVERFLOW
W PD A507 PDL ERR 507
W PD A508 PDL ERR 508
W PD A509 PDL ERR 509
W PD A50A PDL ERR 50A
W PD A50B PDL ERR 50B
W PD A50C PDL ERR 50C
W PD A50D PDL ERR 50D
W PD A50E PDL ERR 50E
W PD A50F PDL ERR 50F
W PD A510 PDL ERR 510
W PD A511 PDL ERR 511
W PD A512 PDL ERR 512
W PD A513 PDL ERR 513
W PD A514 DATA IGNORED
(1) Type (2) Character string (3) Error number
Meaning
MYKrcvInterface returned an error when
receiving a message from a TWAIN task
MYKsndInterface returned an error when
sending a message
Job ID mismatch
Occurs when the job status changes while the
job operation screen is displayed, and the correct
job control cannot be executed.
An error exists in the D-SCAN format.
Received an unsupported HP-GL or HP-GL/2
command.
The number of parameters for a HP-GL or HP-
GL/2 command is incorrect.
Received a drawing command outside the
supported range of HP-GL or HP-GL/2 command
parameters, or a drawing command using
unusable parameter characters.
Received an unsupported HP-GL or HP-GL/2
command character set command.
An overflow error for the polygon buffer size
occurred.
Data was disregarded because there was no
valid print data in the HP-GL command.
Pattern memory overflowed because there were
too many pattern registrations on one page.
Pattern memory overflowed because there were
too many hatch registrations on one page.
External character memory overflowed because
there were too many external character
registrations for the D-SCAN format.
No free memory area for the HP-GL user
registration characters.
VMS memory overflowed because the data
volume on one page was too large.
Spool memory overflowed.
An overflow error for the polygon buffer size
occurred.
Program warning
Data was disregarded because there was no
valid print data on the paper.
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Error Log Reference
T
Action
Restart the Printer.
0
Analyze the data dumped together
with the error message, and correct
the error on the computer side.
Correct the error on the computer
side.
Check on the computer side whether
valid print data is being transmitted.
Reduce the pattern registration data
on one page.
Reduce the hatch registration data
on one page.
Reduce the external character
registration data on one page.
Correct so that the number of
registrations or the data per
character is reduced.
Reduce the data volume on one
page.
When operating with Centering =
On, set to Centering = Off.
Correct the error on the computer
side. (Polygon buffer upper limit:
106600 points.)
When the error persists and there is
a problem in the printout, upgrade
the system.
Check on the computer side whether
valid print data is being transmitted.
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
205