Oki Teriostar LP-1030 User Manual page 79

(4) Set the roll
Set the user defined series roll into the roll paper drawer. For the roll paper setting
page 44.
method, see
(5) Set the paper menu
Set Size Standard to User Defined series for the roll paper drawer in which you
set the roll ( & page
(6) Set up the PDL
In the PDL setup for the data transmission port, set
Paper to User Defined
Also, when performing user defined operations with the printer driver, set
to User Defined
Drive
(7) Unexpected operation
If the user defined series does not operate as expected, Again check the settings (1)
to (6).
84).
( & page 111).
( & page 126).
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Size of Automatically Supplied
Chapter
1
Chapter
2
Chapter
3
Printer
Chapter
4
Chapter
5
79