Oki Teriostar LP-1030 User Manual page 95

<Parameter by entering numbers>
000.000.000.000 to 255.255.255.255
y
Error
Specifies a trap to be sent at an error related to the engine. However, the error does
not include the technical call errors.
The destination to send the trap at an error is the trap agent computer set in the
previous item, TRAP ** Agent Computer.
However, note that this setting is disabled even if set to On when the TRAP Agent
Computer is not specified.
<Parameter by selecting options>
On
n
Off
y
Job
Specifies a trap to be sent when a print job is completed. When this parameter is
not set to Off, the trap condition is specified with TRAP**:IP address or TRAP**:IP
operation.
<Parameter by selecting options>
Off
n
On by IP Address
On by Port
y
IP Address
Enabled when On by IP Address is selected in operation TRAP ** job. The setting
can be changed. If the IP address specified here matches the IP address of the job
transmission destination host, a trap is sent to the TRAP Agent Computer. Note that
when this setting is 000.000.000.000, a trap is sent for all the received jobs.
<Parameter by entering numbers>
000.000.000.000 to 255.255.255.255
Default value:
000.000.000.000
The default value indicates that no IP
address is registered, which is the same
as the trap Off.
: Default value
n
: Default value
n
Default value:
000.000.000.000
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
System Menu
T
Chapter
Chapter
Chapter
Chapter
Chapter
95
1
2
3
4
5