Oki Teriostar LP-1030 User Manual page 115

n
Output Tray
The parameter specifies the size of the printout to be output on the optional tray.
<Parameter by selecting options>
Off
n
Output Tray
Note
When an optional Folder is connected to the Printer, the Printer outputs all
‹
printouts to the paper outlet slot.
n
Folder
Your printer does not use this parameter. So always set the parameter to Not
Enabled. With Enabled, the printer will not start correctly.
n
Print from End
The parameter activates the function to rotate the image by 180 degrees before
printing.
<Parameter by selecting options>
Off
n
On
n
Print Direction
The parameter selects the print direction. This function is effective when:
- The image is printed with a standard size, and
- To print the image, two types of the roll paper installed are available
<Parameter by selecting options>
Short Edge First
n
Long Edge First
T
: Default value
n
The Printer outputs all paper to the lower output slot.
The Printer outputs the A3 or smaller printout to the tray.
: Default value
n
The Printer does not rotate the image by 180 degrees
before printing.
The Printer rotates the image by 180 degrees before
printing.
: Default value
n
The printer plots the image with setting its shorter edge
toward the roll paper's lead edge.
The printer plots the image with setting its longer edge
toward the roll paper's lead edge.
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Setup Items in PDL Settings Menu
Chapter
1
Chapter
2
Chapter
3
Chapter
4
Chapter
5
115