Oki Teriostar LP-1030 User Manual page 114

Setup Items in PDL Settings Menu
T
Chapter
1
Chapter
2
Chapter
3
Chapter
n
4
Chapter
5
n
114
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Centering O
printed image
Y
X
Paper feed direction Cut position
Paper Type
The paper type is specified, which is valid at the automatic paper supply with Paper
Supply Mode set to Continuous or Optimal.
<Parameter by selecting options>
Not Specified
n
Plain
Tracing
Film
Excess Size Tolerance (mm)
When an image size exceeds a standard size or a roll paper size, the Printer
identifies the image size as the standard size or the roll paper size on the condition
that the excess is within the defined excess size tolerance.
However, note that the part of the image exceeding the used paper size is not
printed, as the actual print area is not affected by the excess size tolerance.
<Parameter by entering numbers>
0 to 30
Centering On
a
Y
X
Paper feed direction
a: Varies depending on the printed image size.
b: Varies depending on the printed image size.
Regardless of the printed image size, the
image is positioned in the center of the paper.
: Default value
n
Does not specify the paper type.
Supplies plain paper.
Supplies tracing paper.
Supplies film.
Default value = 2, Unit in mm
b
a
printed image
b
Cut position