Omron Programmable Terminals NT31 NT31C Setup Manual page 209

System Maintenance
Reference:
S With the NT31/NT31C, the record data can also be displayed by calling screen
No. 9001 (sort by occurrence) or screen No. 9002 (sort by frequency) during
the RUN mode.
S For details on the display history record function, refer to 2-15-1 Display Histo-
ry Record Function in the Reference Manual.
S The order of display for sort by occurrence display (from oldest record or from
newest record) is set with the Hist. Disp. Method memory switch (page 179).
S The printing method and other information must be set in advance with the
Printer Controller (page 172) and Print Method (page 174) memory switches.
Display and print the display history record data by following the menu operation
from the System Menu shown below.
Ver 3.10
Select Maintenance Mode.
Select Display History.
Select Sort by Occurrence or Sort by Fre-
quency.
If necessary, select the next or previous
screen by pressing [↓] (next screen) or [↑]
(previous screen).
The example screen to the left shows a
display for the sort by occurrence method
(from oldest record).
Section 6-11
199