16
ELECTRICAL SYSTEM
16.15
Adjusting the cornering light range
–
Set the headlight to marking
Guideline
The light-dark boundary must lie exactly on the lower mark
is ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
402424-10
Finishing work
–
Install the bottom triple clamp cover. (
Preparatory work
–
Check the setting of the lighting system. (
Main work
–
Press the UP or DOWN button until the "Settings" menu appears on the matrix display.
Pressing the SET button opens the menu.
–
Press the UP or DOWN button until "cLightTest" is highlighted in black on the matrix dis-
play. Pressing the SET button again starts the cornering light test.
–
Wait for a few seconds until the upper segment of the left cornering light lights up con-
tinuously.
.
p. 130)
p. 199)
202
when the motorcycle