16
ELECTRICAL SYSTEM
16.14
Adjusting the headlight range
–
Wait for a few seconds until the upper segment of the right cornering light lights up
continuously.
–
Checking the right cornering light setting.
The light-dark boundary of the upper segment must run exactly through the right
marking.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the cornering light range. (
–
Press the SET button.
The cornering light is switched off.
402428-01
Preparatory work
–
Check the setting of the lighting system. (
–
Remove the bottom triple clamp cover. (
Main work
–
Turn adjusting screw
Info
Turn clockwise to increase the headlight range; turn counterclockwise to reduce
the headlight range.
If you have a payload, you may have to correct the headlight range.
M00807-10
p. 202)
p. 199)
p. 129)
to adjust the headlight range.
201