KTM 1290 SUPER ADVENTURE Owner's Manual page 209

16 ELECTRICAL SYSTEM
–
Switch on the ignition by turning the orange programming key to the ON position
Immobilizer indicator lamp lights up.
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the black ignition key to the position ON
Immobilizer indicator lamp lights up.
–
Switch off the ignition by turning the black ignition key to the position OFF
–
Remove the black ignition key.
–
If two other black ignition keys are to be activated, repeat the last steps with the
respective ignition key.
–
If the last black ignition key was activated, insert the orange programming key into
the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
The immobilizer
tional black ignition keys including the orange programming key.
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the orange programming key.
Info
Activation of the ignition key is finished.
To activate four black ignition keys:
–
Press the emergency OFF switch to the position ON
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
Immobilizer indicator lamp lights up.
indicator lamp flashes according to the number of func-
207
.
.
.
.
.
.
.
.