KTM 1290 SUPER ADVENTURE Owner's Manual page 168

15 WHEELS, TIRES
Main work
–
Place a load on the rear of the vehicle.
The front wheel is not in contact with the ground.
–
Remove screw
M00834-10
–
Remove screws
–
Press back the brake linings with a slight lateral tilting of the brake calipers on the
brake disc.
–
Pull the brake calipers carefully back from the brake discs and hang them to one side
loosely.
Info
Do not pull the hand brake lever when the brake caliper has been removed.
V00101-10
–
Loosen screw
–
Loosen screws
–
Press on screw
–
Remove screw
M00836-10

and pull wheel speed sensor

from both brake calipers.

by several rotations.

.

to push the wheel spindle out of the axle clamp.

.

out of the hole.
166