16
ELECTRICAL SYSTEM
–
Turn adjusting screw
Info
Turn clockwise to increase the headlight range; turn counterclockwise to reduce
the headlight range.
V00106-10
–
Set the upper segment on the left marking.
Guideline
The light-dark boundary of the upper segment must run exactly through the left mark-
ing.
–
Press the SET button.
The left cornering light is switched off.
The right cornering light test is started.
–
Wait for a few seconds until the upper segment of the right cornering light lights up
402427-01
continuously.
–
Turn adjusting screw
Info
Turn clockwise to increase the headlight range; turn counterclockwise to reduce
the headlight range.
V00107-10
to adjust the left cornering light range.
to adjust the right cornering light range.
203