Osd Setting; Undertext Display; Hide Osd; Osd Transparency - Mirage BOX2IP User Manual


10. Mark the button Save by using the keys PR+ and PR-, and confirm by
pressing OK (or select Cancel and confirm by pressing OK if you want
to cancel programming – then you will return to the sub-menu Timer
Setting).


9.11 OSD Setting

 Select in the menu System setup the submenu OSD
press OK.

9.11.1 Undertext Display

 Using the keys
(in the language you set in the section „Language Setting", page 58).
Default value is

9.11.2 Hide OSD

 Using the keys
the OSD should be hidden. You may set values from
Default value is

9.11.3 OSD Transparency

 Select transparency of the on-screen menu by using the
keys and
You may set values from
transparent). Default value is
10 OSD = On Screen Display
You can go from letter to letter (position to position) in
the date and time fields by pressing the keys
.
You can directly add programs marked in EPG to the
timers. This significantly facilitates programming as you
do not have to make settings for channel, date and
time.
/ , set whether subtitles are displayed always
Off
.
and , set the number of seconds after which
5
s (factory setting).
.
0% (OFF)
OFF
Extended Settings and Functions
(no transparency) to
.
and
Setting and
10
9F
1 to 10 seconds
.
40%
(almost
61