Basic Operation; First Comissioning; Switch On Receiver; Upgrade Of The Receiver Software - Mirage BOX2IP User Manual

Basic Operation

5 Basic Operation
This chapter describes the required steps to be able to use the offer of
radio and TV channels provided via wide-band cable

5.1 First Comissioning

5.1.1

Switch on Receiver

1. Switch on all connected devices.
2. Ensure that the correct AV input is selected at the TV set (i.e. that the
signals from the receiver are displayed).
3. Ensure that the correct audio input is selected at the connected home
cinema or hi-fi system.
4. Switch on the receiver by using the power switch (on the rear panel of
housing) (I, ON).
5.1.2

Upgrade of the Receiver Software

The operation software of your receiver will be updated via the USB port.
1. Search for the upgrade file on the internet page which is mentioned on
the extension page (menu item service) and save it to a USB data stor-
age.
2. Unpack the file with the ending .abs and copy it to the USB data stor-
age.

3. Connect the data storage to your receiver.
Tools
4. In the menu
the OK key.
Upgrade Mode
5. At
keys and
Upgrade File
6. At
3
The radio and TV programs available via wide-band cable depend on your respective cable
network provider.
22
Please note that the upgrade file (*.abs) is copied direct-
ly to the root directory of the USB data storage (no
subdirectory)!
, select the submenu
, select the upgrade mode
.
, select the file copied in step 2.
.
3
2F
Upgrade by USB
All code
by using the
and press