Connect Data Storage - Mirage BOX2IP User Manual

a.
Your home cinema system is able to loop
through an HDMI signal, i.e. HDMI connection
for receiver and HDMI connection for TV set.
 Connect the home cinema system and the re-
ceiver by using an HDMI cable as well as home
cinema system and TV set by using an HDMI
cable.
b.
Your home cinema system can process digital
audio data – connection for digital data is pre-
sent.
 Connect home cinema system and receiver by
using an RCA cable.
c.
Your home cinema system
tal audio data – no connections for digital data
present
 Connect the home cinema system and the re-
ceiver by using a 2-pole RCA cable (stereo).


4.5 Connect Data Storage

 Connect a data storage device (USB stick or hard drive with USB con-
nection) at the USB connector to be able to access MPEG, MP3, JPG
cannot
 If your home cinema system (hi-fi system) supports
HDMI connection, then use such connection.
This ensures best possible audio and video quality
with digital signals.
Installation of the Receiver
process digi-
Receiver
TV set
DIGITAL AUDIO
19