Osd Setting; Automatic Standby Function; Display Setting - Mirage smartSTREAM - BOX2IP User Manual

9.5

OSD Setting

 Select in the menu System Setup the submenu OSD
9.5.1 Hide OSD
 Using the keys
be hidden. You may set values from
5
Default value is
9.5.2 OSD Transparency
 Select transparency of the on-screen menu by using the keys
and
You may set values from
OFF
fault value is
9.6

Automatic Standby Function


1. Select in the menu System Setup the submenu Other and press OK.
2. Select Auto Standby to switch on or switch off the automatic standby function, using the
keys and
9.7

Display Setting

Select in the menu Tools the submenu Display setting and press OK to edit various display
settings:
 Select Brightness to change the brightness value from 0 to 100 (default value is 50) by
using the keys
 Select Contrast to change the contrast value from 0 to 100 (default value is 50) by using
the keys and
 Select Saturation to change the saturation value from 0 to 100 (default value is 50) by
using the keys
 Select Hue to change the hue value from 0 to 100 (default value is 50) by using the keys
and
 Select Sharpness to change the sharpness value from 0 to 10 (default value is 5) by
using the keys
OSD = On Screen Display
18
and , set the number of seconds after which the OSD should
1 to 10 seconds
s (factory setting).
.
0% (OFF)
(no transparency) to
.
Based on current EC regulations, this receiver is equipped with an
energy saving system. After three hours, the receiver will automatical-
ly switch to energy save mode (energy consumption of less than 1 W)
unless a function is triggered via remote control during such period
(e.g. volume change or switching of channels). You can deactivate the
automatic standby function via the menu.
(factory setting is Auto Standby
and .
.
and .
.
and .
Extended Settings and Functions
Setting and press OK.
18
17F
.
40%
(almost transparent). De-
On
).
49