Aspect Mode - Mirage BOX2IP User Manual

3. With the keys PR+ or PR- select a line
your selection with OK to activate subtitles. Only if several subtitle lan-
guages are being sent there will appear several lines
If for example only German subtitles are sent,
tle language.
To switch off the subtitles proceed as follows:
1. Press the key TXT to open the selection window
2. Press the keys
Another window
3. With the keys PR+ or PR- select the line
selection with OK to deactivate the subtitles.

5.7.10 Aspect Mode

5.7.10.1 Setting the Aspect Mode with the V-MODE key
 Press the V-MODE key several times to set the aspect ratio. Possible
values:
Auto 4:3PS 4:3LB
, ,
5.7.10.2 Setting the Aspect Mode via the Menu
System setup
 In the menu
the menu item
and
Value Meaning
Auto
Default setting: the receiver selects optimum value
4:3PS
For playback with a 4:3 screen, PS = Pan & Scan:
• 4:3 program: picture is optimally displayed.
• 16:9 program: picture height is adjusted to screen; picture in-
formation on the right and left are missing.
4:3LB
For playback with a 4:3 screen, LB = Letterbox
• 4:3 program: picture is optimally displayed.
• 16:9 program: picture width is adjusted to screen; lacking height
is filled up by black bars.
16:9
For playback with a 16:9 TV set
and to select
Subtitle language
16:9LB
, (see below table).
, select the submenu
Aspect mode
to set the aspect ratio by using the keys
.
Subtitle language
deu(D)
Subtitles/Teletext
Subtitle and confirm with OK.
appears.
SUB OFF
and confirm your
TV system
Basic Operation
and confirm
Subtitle language
is preset as subti-
.
and then
39
.