Set Time - Mirage BOX2IP User Manual

Basic Operation

5.6 Set Time

Reasonable operation of the receiver require setting of system time. By
default, the receiver is set to
from the received signal. Time zone is set to GMT + 1 hour (+ 1:00) by
default. Required changes can be made in the submenu
ting
:
1. Select the menu
2. Select the submenu
3. Select the item
the keys
On
= automatic time setting via cable signal is activated.
Off
= automatic time setting via cable signal is deactivated.

4. Select the item
keys or
Switzerland is
5. Select the item
using the keys
 Please verify the pre settings and correct them, if re-

6. If automatic time setting (
time should be manually entered:
For this, select the item
ing the keys
meric keys. Then, select the item
changed by using the keys
using the numeric keys.
4 GMT = Greenwich Mean Time
28
GMT
System setup
Local Time Setting
GMT usage
and switch on or off
or .
It is recommended to keep the presetting
GMT usage On
).
(
GMT offset
and select your time zone by using the
; for example, the time zone of Germany, Austria and
GMT +1:00
.
Summer time
and switch
or .
quired. Please also consider corresponding change of
those settings.
GMT usage
Date
, select the position to be changed by us-
or , and enter the current date by using the nu-
usage
4 , i.e. date and time are taken
3F
(see above).
and confirm by pressing OK.
Summer time Off
) is switched off, then date and
Time
, select the position to be
or , and enter the current time by
Local Time Set-
GMT usage
by using
On
or by