Extended Settings And Functions; Channel Search; Automatic Channel Scan; Manual Channel Scan - Mirage BOX2IP User Manual

Extended Settings and Functions

9 Extended Settings and Functions

9.1 Channel Search

If you want to start channel scan during on-going operation (e.g. if your
cable network provider changed channel allocation) then you have two
possibilities:
9.1.1

Automatic Channel Scan

1. Press the key MENU.
2. Select the menu
Auto search
3. Select
4. Further procedure is the same as described in section 5.1.4 (Auto
Scan) on page 25.
9.1.2

Manual Channel Scan

Instead of using Auto Scan, you can also manually set the DVB-C chan-
nels:
1. Press the key MENU.
2. Select the menu
using the keys PR+ and PR-.
Quick search
3. Select
firm by pressing OK. The win-
dow on the right will open.
Signal strength and signal quality are displayed on the bottom of the win-
dow. Now you can perform manual channel scan.
 Select the Scan Mode, either By Channel or By Frequency.
Scan Mode By Channel
1. Select the desired channel (frequency) at Channel No. by using the
keys and
2. Enter at Symbol Rate the value predetermined by your cable network
provider, using the numeric keys of the remote control and the keys
and
52
Installation
by using the keys PR+ and PR-.
and confirm by pressing OK.
Installation
by
and con-
.
.