Operation; Live-Tv On Your Tv Set; Smartstream Mode (Box2Ip Mode) - Mirage BOX2IP User Manual

Tips for operation or assistance during troubleshooting for the used appli-
cation, you can get from the regarding manual or the supplier's support
web page.

8.2 Operation

There are two possibilities to use the smartSTREAM function.
As soon as the app is started, the current TV program will be transferred
to the mobile device.
8.2.1

Live-TV on your TV Set

Simultaneously with the start of the app the receiver channel list will be
reduced. It now contains only those channels broadcasted via the same
transponder as the current TV channel.
 In between this channel list you can switch channels with the remote
control of your receiver.

8.2.2 smartSTREAM Mode (BOX2IP Mode)

 Press the key BOX2IP or go in the menu
BOX2IP
and press OK, to set the receiver into smartSTREAM mode.
On the TV screen you see now the "BOX2IP" OSD screen instead of
the TV image.
On your mobile device you have now a complete channel list, containing
all channels which are broadcasted via the satellites you set in section
8.1.1.
 Switch the channel directly on your mobile device.
During smartSTREAM mode (BOX2IP mode) you can
switch off your TV set.

Valid for both operation modes 8.2.1 and 8.2.2 is:
On the network devices which are connected to the re-
ceiver (maximum 4) you only can watch channels which
are broadcasted via the same transponder!
smartSTREAM - BOX2IP
Media
to the menu item
51