Auto Scan; Select Operation Mode - Mirage BOX2IP User Manual

5.1.3.3 All Other Countries
For all other countries there is no special sorting of the channel list. In
case of a new channel assignment it's recommended to perform a new
channel search (section 9.1.1, page 52).
5.1.4

Auto Scan

 Using the keys PR+ and PR, go to the button
start automatic channel search.
The second window of the instal-
lation process displays the auto-
matic channel search. The TV
cable is scanned for any available
channels. Such search then cre-
ates the channel lists
Radio Channel
and
1. After end of search, please confirm the corre-
sponding message by pressing OK.
2. Leave the menu by pressing the EXIT key until
the screen shows the TV picture.


5.2 Select Operation Mode


You can select between the operation modes TV (TV channels) and
RADIO (radio channels) as follows:
 Press the key TV/RADIO on the remote control.
 Press again the key TV/RADIO to return to the previous operation
mode.
TV Channel
.
Auto search
The menu item
Installation
via the menu
TV is the operation mode after first switching-on of the
receiver (or after restoration of factory settings).
Start
and press OK to
can always be accessed
.
Basic Operation
25