Connect Tv Set; Connect Home Cinema System - Mirage BOX2IP User Manual

Installation of the Receiver

4.3 Connect TV Set

As stated in the connection scheme, the receiver offers various possibili-
ties to connect TV set and receiver. The possibilities applicable to you
depend on the connection possibilities of your TV set.

The TV set provides of an HDMI
connection:
 Connect TV set and receiver by
using an HDMI cable.


4.4 Connect Home Cinema System

To improve audio playback, you can connect to the receiver - additionally
to the TV set - also a multichannel home cinema system or a hi-fi system.
There are various possibilities for connection. Your type of connection
depends on the connection possibilities of your home cinema system.
18
If your receiver is in sleep mode (deep standby) or the
device was disconnected from power (via power switch
or by pulling the plug), there is no or just a weakened
signal at ANT OUT.
 If your TV set offers both possibilities then always
choose connection via HDMI cable.
This ensures best possible audio and video quality
with digital signals.
The TV set does not provide of
an HDMI connection:
 Connect TV set and receiver
by using a SCART cable.