Software Version; Factory Settings - Mirage BOX2IP User Manual

CAUTION!

9.15 Software Version

Information
The submenu
number of the receiver's software.

9.16 Factory Settings

If you erroneously saved wrong settings or if you want to pass on the re-
ceiver without your settings, then you can reset the receiver to the factory
settings (reset):
To reset the receiver:
Tools
1. In the menu
2. Press the OK key.
You will be asked if you want to reset the receiver and delete individual
settings.
3. Select Yes or No by using the keys
After resetting your receiver, the language selection menu will be dis-
played.
If you select Loop Standby
standby mode after switching off, but not into the pow-
er saving mode. The display shows the current time.
of the menu
, select the submenu
Extended Settings and Functions
On
, the receiver goes into
Tools
displays the current version
Factory Settings
, and then press OK.
und
.
63