Rass; Tv Channel List / Radio Channel List - Mirage BOX2IP User Manual

3. Select at Scan QAM the value predetermined by your cable network
provider, using the keys
4. Select at Network Search if all channels of a modulation type should
be searched (e.g. all channels with QAM-64), using the keys
.
5. Select Search to transfer the channels found with this frequency to the
channel lists.
Scan Mode By Frequency
1. Enter at Frequency the desired frequency, using the numeric keys of
the remote control and the keys
2. Enter at Symbol Rate the value predetermined by your cable network
provider, using the numeric keys of the remote control and the keys
and
3. Select at Scan QAM the value predetermined by your cable network
provider, using the keys
4. Select at Network Search if all channels of a modulation type should
be searched (e.g. all channels with QAM-64), using the keys
.
5. Select Search to transfer the channels found with this frequency to the
channel lists.

9.2 RASS

 To change RASS settings go in the menu System setup to the sub-
menu RASS.
 The field Last changed date displays the last modification date of the
RASS-file in the receiver.
 Select the RASS to switch on or off RASS.
 Select RASS Update to update the channel list manually via USB.

9.3 TV Channel List / Radio Channel List

You can individually customize the lists. There are various available possi-
bilities for editing. For reasons of simplification, only editing of TV lists will
be explained in the following. Editing of radio channel lists will be per-
formed corresponding to editing of TV channel lists.
and
.
and
Extended Settings and Functions
.
and .
.
and
and
53