Format Of The Video Signal At The Scart Output; Digital Audio Out; Smartlink (Cec) - Mirage BOX2IP User Manual

9.7 Format of the Video Signal at the SCART Output

1. In the window TV system move highlight on Scart Out item and press
OK.
2. Press the keys PR+/PR- to select from the list the format of the video
signal at the SCART output and press OK. Possible values are
RGB
and . Default is


9.8 Digital Audio Out

 Select in the menu System setup the submenu TV System and press
OK.
 Select Digital Audio Out to set the format of the digital audio signal by
using the keys
PCM
– Pulse Code Modulation (default),
DD
– Dolby Digital (multi-channel audio).


9.9 SmartLink (CEC)

If you have a CEC
nected via HDMI you can switch on and off (standby mode) both sets with
the receiver's remote control:
1. Select in the menu
SmartLink
2. Select
SmartLink function on and off.
9
CEC = Consumer Electronics Control = HDMI feature for entertainment units, provides via
HDMI various control functions, e. g. "system standby". The TV set is the control center and
the TV remote control becomes the remote control of the whole system.
YUV
.
Due to the internal signal processing it's not anymore
possible to select higher resolutions than 576i even at
the HDMI if RGB is selected
and :
For programs broadcasted in DD format, select DD if
you have a connected DD-compatible multi-channel
amplifier or a DD-compatible home cinema system, or if
your TV set is capable of processing DD signals.
-compatible TV set, and receiver an TV set are con-
9
8F
System
the submenu
and use the keys
Extended Settings and Functions
TV System
and press OK.
und to switch the
YUV
59