Cleaning; Transport And Decommissioning - Mirage BOX2IP User Manual

Cleaning

10 Cleaning
 Always disconnect mains plug from power outlet before
 Never clean the receiver using a damp cloth.
WARNING!
 Always ensure that no liquid enters the receiver.
 Do not use solvent-containing cleaning agents like pe-
CAUTION!
 Clean the housing of the receiver using a dry cloth.

11 Transport and Decommissioning

Proceed as follows if you want to transport the receiver of if you do
not want to use the receiver any more:
1. Disconnect the receiver and all connected devices from power supply.
2. Disconnect any cables connected to the receiver.
3. Remove the batteries from the remote control.
4. Put receiver, cables and remote control into the original packaging.
5. Store the receiver and the accessory parts at a dry and dust-free loca-
tion.
6. Protect the receiver from freeze.
64
There is the risk of electric shock when cleaning the
receiver!
cleaning.
There is the risk of damaging the receiver when
cleaning the receiver!
troleum ether or thinner.