Connecting To A Home Network; Installing A Smartcard; Connect Power Supply - Mirage BOX2IP User Manual

Installation of the Receiver
or other media data files. You can connect respectively one data stor-
age to each of the two connectors.

4.6 Connecting to a Home Network

 In order to connect the receiver to the internet (www) or to a home
network, connect the receiver's ETHERNET socket with a network ca-
ble to the appropriate interface of your home network.

 See section 8.1.1 on page 48 to learn how to configure

4.7 Installing a Smartcard

 If you want to watch scrambled programs, put a Conax smartcard into
the Conditional Access (CA) slot at the receiver's rear panel.


4.8 Connect Power Supply

 When all devices are properly connected to the receiver you can con-
nect the mains plug to the power outlet.
20
a wired LAN.
For more info about smartcard see section
card
.
CA Smart-