Connecting A Satellite Antenna; Connecting A Tv Set; Connecting A Data Storage Device; Connecting A Home Cinema System - Mirage smartSTREAM BOX2IP Quick Start Manual

Operation of the Receiver

2.2

Connecting a Satellite Antenna

Connect the antenna cable to the receiver connection LNB IN.

2.3

Connecting a TV Set

Depending on the connection possibilities of your TV set, there are various possibilities to connect TV
set and receiver.
Connect TV set and receiver by using an HDMI cable or connect TV set and receiver by using a

SCART cable.
2.4

Connecting a Data Storage Device

Connect a data storage device (USB stick or hard drive with USB connection) at the USB connector

to be able to access MPEG, MP3, JPG or other media data files.
2.5

Connecting a Home Cinema System

To improve audio playback, you can connect to the receiver - additionally to the TV set - also a multi-
channel home cinema system or a hi-fi system. There are various possibilities for connection. Your type
of connection depends on the connection possibilities of your home cinema system.
• Your home cinema system is able to loop through an HDMI signal, i.e. HDMI connection for receiver
and HDMI connection for TV set.
Connect the home cinema system and the receiver by using an HDMI cable as well as home

cinema system and TV set by using an HDMI cable.
• Your home cinema system provides a cinch connection for digital audio data.
Connect the home cinema system and the receiver by using a RCA cable.

• Your home cinema system cannot process digital audio data.
Connect the home cinema system and the receiver by using a 2-pole RCA cable (stereo).

2.6

Insert Batteries of Remote Control

This describes the steps for inserting new batteries of the remote control or for replacing empty
batteries:
1. Open the battery compartment on the bottom side of the remote control. Remove the cover of the
battery compartment.
2. Place the two batteries 1.5 V (type: AAA). Ensure correct polarity!
3. Close the battery compartment



3 Operation of the Receiver
This chapter describes the required steps to be able to use the offer of radio and TV channels provided
via satellite.
In order to simply the presentation in the following sections the keys for the hori-

zontal menu navigation
6
Replace the batteries if certain remote control functions are not performed
any more or are performed incorrectly.
When replacing batteries, always ensure that all batteries are replaced.
and will be called V+ and V- (V for Volume).