Select Operation Mode - Mirage smartSTREAM - BOX2IP User Manual

Basic Operation
5.6.1 Country
 Select the country in which you want to
use the receiver - and correspondingly
also the RAPS list - by pressing the
keys PR+ and PR-. The selectable
countries are based on your satellite se-
lection as per section "Satellite List".
 Press OK to go to the next window Your regional channel.
5.6.2 Regional Channel
 Select your preferred regional channel
(which will be stored at number three in
the channel list) by pressing the keys
PR+ and PR-.
 Press OK to go to the next window Channel-Filter; here you can select if you want to
include erotic channels and call TV (channels that may incur quite high telephone costs
due to telephone calls to the channel) into the channel list.
5.6.3 Channel Filter
 Select Erotic and/or Call TV by pressing
the keys PR+ and PR-, and select the
Yes
option ( ) to include such channels
into the channel list or (
clude such channels by respectively
pressing /
 Press OK to store your settings and to finish installation of the RAPS channel list. After
this, TV operation will automatically start.
5.7

Select Operation Mode


You can select between the operation modes TV (TV channels) and RADIO (radio chan-
nels) as follows:
 Press the key TV/RADIO on the remote control.
 Press again the key TV/RADIO to return to the previous operation mode.
20
No
) to not in-
.
TV is the operation mode after first switching-on of the receiver (or af-
ter restoration of factory settings).