Mobile Device; Operation; Live-Tv On Your Tv Set; Smartstream Mode (Box2Ip Mode) - Mirage smartSTREAM BOX2IP Quick Start Manual

2. Set under
Satellite 1, Satellite 2, Satellite 3 and Satellite 4 the satellites broadcasting the channels which
should be available for the transfer to a mobile device.

To use the smartSTREAM function, it is absolutely necessary to make these settings.
4.1.2

Mobile Device

1. Connect your mobile device via WLAN with the router in your home network. For this, pay attention
to the respective notes in the manual of the mobile device.
2. Install the Elgato SAT>IP App on your mobile device:
- for the operating system iOS from the Apple App Store and
- for the operating system Android from the Google Play Store.
3. Run the Elgato SAT>IP-App. Receiver and mobile device will be connected with each other via
LAN / WLAN. If the connections are ok, you will see the receiver as Sat>IP server in the Elgato app
menu Settings at the menu item
4. If you do not see it, check the LAN / WLAN connections. If there are several reachable Sat>IP
servers, they are shown respectively. Select the desired device.
5. Start channel search
satellites you selected (see section 4.1.1.2, page 10).
6. Confirm the satellites by starting the
selected satellites
7. Confirm also the next two windows.
4.2

Operation

There are two possibilities to use the smartSTREAM function.
As soon as the Sat>IP-App is started, the current TV program will be transferred to the mobile device.
4.2.1

Live-TV on your TV Set

Simultaneously with the start of the Sat>IP app the receiver channel list will be reduced. It now contains
only those channels broadcasted via the same transponder as the current TV channel.
In between this channel list you can switch channels with the remote control of your receiver.

4.2.2

smartSTREAM Mode (BOX2IP Mode)

Press the key BOX2IP or go in the menu Media to the menu item BOX2IP an press OK, to set the

receiver into smartSTREAM mode. On the TV screen you see now the "BOX2IP" OSD screen in-
stead of the TV image.
On your mobile device you have now a complete channel list, containing all channels which are broad-
casted via the satellites you set in section 4.1.1.
Switch the channel directly on your mobile device.


During smartSTREAM mode (BOX2IP mode) you can switch off your TV set.
Devices .
. You will get to the menu window
automatic detection
.
BOX2IP - smartSTREAM
satellite setup , where you will see the
or by pressing the button
Search on
11