Omron SYSDRIVE 3G3JV User Manual page 150

Communications
Register No.
(Hex)
0027 Output current
0028 Output voltage
0029 to 002A Not used.
002B Input terminal status
002C Inverter status 1
002D Output terminal status
002E to 0030 Not used.
0031 Main circuit DC voltage
0032 to 003C Not used.
003D Communications error
003E to 00FF Not used.
D Status Signal (Register 0020 Hex)
Bit No.
0
1
2
3
4
5
6 to 15
D Fault Status (Register 0021 Hex)
Bit No.
0 OC
1 OV
2 OL2
3 OH
4 Not used.
5 Not used.
6 Not used.
7 EFj, STP
Note When a fault results, the corresponding bit will be set to 1.
D Data Link Status (Register 0022 Hex)
Bit No.
0
1 to 2
3
4
5 to 15
Function
During RUN (1: During RUN)
Forward/reverse operation (1: Reverse operation)
Inverter ready (1: Ready)
Fault (1: Fault)
Data setting error (1: Error)
Multi-function output (1: ON)
Not used.
Function
Data writing (1: Writing)
Not used.
Upper and lower limit error (1: Error): Outside set range
Verify error (1: Error): Same as OPEj.
Not used.
Description
Read based on 1 A as 10.
Read based on 1 V as 1.
---
Refer to the following corresponding table.
Refer to the following corresponding table.
Refer to the following corresponding table.
---
Read based on 1 V as 1.
---
Refer to the following corresponding table.
---
Function
Bit No.
8 Fj
9 OL1
10 OL3
11 Not used.
12 UV1
13 GF
14 CE
15 Not used.
Function
Chapter 7
Function
7-25