Omron SYSDRIVE 3G3JV User Manual page 63

Preparing for Operation and Monitoring
D Status Monitor
Item Display
U01 Frequency
reference
U02 Output frequency
U03 Output current
U04 Output voltage
U05 DC bus voltage
U06 Input terminal p
status
U07 Output terminal p
status
U09 Error log (most g (
recent one) )
U10 Software No.
H Example of Forward/Reverse Selection Settings
Key sequence Indicator
Note The direction of motor rotation can be changed, even during operation.
Display
unit
Hz Monitors the frequency reference. (Same as FREF)
Hz Monitors the output frequency. (Same as FOUT)
A Monitors the output current. (Same as IOUT)
V Monitors the internal output voltage reference value of the
Inverter.
V Monitors the DC voltage of the internal main circuit of the
Inverter.
--- Shows the ON/OFF status of inputs.
Not
used
--- Shows the ON/OFF status of outputs.
Not
used
---
Displays the latest error.
--- OMRON use only.
Display
example
Press the Mode Key repeatedly until the F/R indicator
is lit.
The present setting will be displayed.
For: Forward; rEv: Reverse
Use the Increment or Decrement Key to change the
direction of motor rotation. The direction of motor
rotation selected will be enabled when the display
changes after the key is pressed.
Function
: Input ON
Terminal S1: Forward/Stop
Terminal S2: Multi-function input 1 (S2)
Terminal S3: Multi-function input 2 (S3)
Terminal S4: Multi-function input 3 (S4)
Terminal S5: Multi-function input 4 (S5)
: Closed
Terminal MA: Multi-function contact
output
Error
Explanation
Chapter 3
: No input
: Open
3-7