Omron SYSDRIVE 3G3JV User Manual page 231

List of Parameters
Parame- Name
ter No.
(Register
No.
(Hex))
n36 Multi-function
input 1 (Input p ( p
(0124) (0124)
terminal S2) t i l S2)
n37 Multi-function
input 2 (Input
(0125)
terminal S3)
n38 Multi-function
input 3 (Input
(0126)
terminal S4)
n39 Multi-function
input 4 (Input
(0127) (0127)
terminal S5)
terminal S5)
10-6
Description
Used to select the functions of multi-function input
terminals S2 through S5.
Set Function
value
0 Forward/Re- 3-wire sequence (to be set
verse rotation in n37 only)
command
By setting n37 to 0, the
set value in n36 is ignored
and the following setting and the following setting
are forcibly made.
S1: RUN input (RUN
when ON)
S2: STOP input (STOP
when OFF)
S3: Forward/Reverse rota- S3: Forward/Reverse rota-
tion command (OFF: For-
ward; ON: Reverse)
2 Reverse/Stop Reverse rotation com-
mand in 2-wire sequence
(Reversed with the termi-
nal turned ON)
3 External fault
ON: External fault (FPj
detection: j is a terminal
(NO)
number)
4 External fault OFF: External fault (EFj
detection: j is a terminal
(NC)
number)
5 Fault reset ON: Fault reset (disabled
while RUN command is in-
put)
6 Multi-step Signals to select frequen-
cy references 1 through 8.
speed refer-
ence 1
Refer to 5-5-4 Setting Fre- Refer to 5-5-4 Setting Fre-
7 Multi-step quency References
speed refer- through Key Sequences
ence 2 for the relationship be-
tween multi-step speed t
8 Multi-step
references and frequency
speed refer-
references.
ence 3
10 Inching fre- ON: Inching frequency
quency com- command (taking prece-
mand dence over the multi-step
speed reference)
11 Acceleration/ ON: Acceleration time 2
Deceleration and deceleration time 2
time change- are selected.
over
Setting
range
2 to 8,
10 to
22 22
Description
0, 2 to
8, 10 to
22
2 to 8,
10 to
22
2 to 8,
10 to
22 34
22, 34,
35
p
lti t d
Chapter 10
Unit of Default Changes
setting setting during
operation
1 2 No
1 5 No
1 3 No
1 6 No
Refer-
ence
page
5-18
5-18
5-18
5-18