Omron SYSDRIVE 3G3JV User Manual page 25

Overview
Appearance
Note For safety reasons, the reset will not work while a RUN command (forward or reverse) is in effect.
Wait until the RUN command is OFF before resetting the Inverter.
1-6
Name
Enter Key
RUN Key
STOP/RESET Key
Enters multi-function monitor numbers, parameter
numbers, and internal data values after they are set or
changed.
Starts the Inverter running when the 3G3JV is in operation
with the Digital Operator.
Stops the Inverter unless parameter n06 is set to disable
the STOP Key. Functions as a Reset Key when an Inverter
error occurs. (See note.)
Chapter 1
Function