Lyrics & Markers Panel - Korg PA800 User Manual

148 Song Play operating mode
Lyrics & Markers panel
Jukebox file
Name of the selected Jukebox file. To edit this file, see "Jukebox
Editor" on page 156.
Transport controls for the Jukebox
When you select a Jukebox file, Sequencer 1 transport controls
work in a slightly different way than with single Songs.
<< and >> Pressed alone, these buttons are the Rewind and
Fast Forward commands.
Keep the SHIFT button pressed, and press
these buttons to scroll to the previous or next
Song in the Jukebox list.
(HOME) Returns to measure 1 of the current Song.
(PLAY/STOP)
Starts or stops the current Song. When you stop
the Song, it is stopped at the current position.
Press HOME to go back to measure 1 of the cur-
rent Song.
If the Jukebox panel is open, you can select the
Song from which to start. See "Jukebox panel"
above.
Lyrics & Markers panel
Lyrics side tabs
These panels show the lyrics and chord abbreviations included
in a Song, or loaded as a ".TXT" file with the Song. You can see
the following types of Lyrics:
• Lyrics included in Standard MIDI Files
• Lyrics included in Karaoke™ files
• Lyrics loaded as a ".TXT" file with a Standard MIDI File or
Karaoke™ file (see "Text files loaded with Standard MIDI
Files" below)
Lyrics will be shown only if they are compatible with a standard
format that Pa800 can understand.
Master Transpose
Song chords
Current beat
While the Song is playing, the text flows in the display. Chord
abbreviations (if any) will appear above the lyrics, in time with
the music (depending on the "Show Chords" parameter status,
under the Options side tab). Lyrics at the current position are
highlighted.
Song chords
Chords contained in the midifile (if any). This indicator may be
easier to read than chords shown within the lyrics.
Master Transpose
Master transpose value in semitones. This value can be changed
using the TRANSPOSE buttons on the control panel.
Current beat
Beat number of the current measure, that is currently playing.
Current measure
Current measure number.
Selected sequencer (SEQ 1/SEQ 2)
Use these side tabs to select a sequencer whose Song to show.
Note: You can have Sequencer 2 selected in the Main page of the
Song Play mode, and Sequencer 1 selected in the Lyrics page, or
vice-versa. This way, you can select a Song whose lyrics to display
on the external video monitor, while selecting a different sequencer
for editing operations.
Current measure
Selected
sequencer
Display
options
STS