97Y Errors - Lexmark CX310 Service Manual

97y errors

97y error messages
Error code
975.xx
975.xx
976.xx
978.xx
979.xx
Standard network/network card error service check
Action
Step 1
Is the network card installed?
Step 2
Make sure that the network card is installed correctly. If not, then reinstall
the card.
Does this solve the problem?
Step 3
Replace the controller board.
Does this solve the problem?
Standard network/network card programming error service check
Action
Step 1
Make sure that you have downloaded the code in binary mode and not in
ASCII, and then reprogram the network card.
Does this solve the problem?
Step 2
Is the network card installed?
Description
Network error: unrecognizable network port.
Unrecoverable software or error in network or
network card x.
Bad checksum while programming Standard
Network or Network Card x port.
Flash parts failed while programming the
Standard Network or Network Card x port.
Diagnostic information
Action
Replace the standard network card or the card
in the specified slot.
Go to "Standard network/network card error
service check" on page
Go to "Standard network/network card
programming error service check" on
page 117.
Go to "Standard network/network card error
service check" on page
Yes
Go to step 2.
The problem is solved. Contact the next level
The problem is solved. Contact the next level
Yes
The problem is solved. Go to step 2.
Go to step 3.
117
7527
117.
117.
No
Go to step 3.
of support.
of support.
No
Go to step 4.