91y errors
91y error messages
Error code
910.xx
911.xx
912.xx
913.xx
914.xx
915.xx
916.xx
917.xx
918.xx
919.xx
91x.xx (910.xx‑919.xx) Engine software service check
Actions
Turn the printer off, and remove the rear cover See
on page
307.
Check the cable connections. See
page 309
for proper disconnecting and connecting of cables from
controller board.
Are all cable connections secure?
938 errors
938 error messages
Error code
938.01
938.02
938.03
938.04
Description
A general engine software error.
A general engine software error.
A general engine software error.
A general engine software error.
A general engine software error.
A general engine software error.
A general engine software error.
A general engine software error.
A general engine software error.
A general engine software error.
"Rear cover removal"
"Controller board removal" on
Description
Board level was not obtained.
Time out waiting for bullet serial data to be
updated.
NVM_OK was not received from NV2 server for
successfully submitted request.
Over temperature condition detected.
Diagnostic information
Action
Go to
"91x.xx (910.xx‑919.xx) Engine
software service check" on page
Yes
Replace the controller
board. See
board removal" on
page
309.
Action
Go to
"Controller board removal" on
page
309.
112
112.
No
Secure all connections.
"Controller
POR the printer.
7527