Lexmark CX310 Service Manual page 84

Message
Replace defective black and color imaging
kit [31.xy]
Replace jammed originals if restarting
job.
Replace maintenance kit, 0 estimated
pages remain [80.xy]
Replace missing [color] cartridge
[31.xy]
Replace missing black and color imaging
kit [31.xy]
Replace waste toner bottle [82.xy]
Replace unsupported [color] cartridge
[32.xy]
Replace unsupported black and color
imaging kit [32.xy]
Replace missing waste toner bottle
[82.xy]
Action
Replace the defective imaging kit to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then
see the "Ordering supplies" section of the User's Guide or
visit http://support.lexmark.com.
Try one or more of the following:
•
Touch Cancel job to clear the message and cancel the scan
job.
•
Touch Scan from automatic feeder to continue scanning
from the ADF immediately after the last successful scan
job.
•
Touch Scan from flatbed to continue scanning from the
scanner immediately after the last successful scan job.
•
Touch Finish job without further scanning to end the last
successful scan job.
•
Touch Restart job to restart the scan job with the same
settings from the previous scan job.
Contact customer support at
your service representative, and then report the message. The
printer is scheduled for maintenance.
Install the indicated toner cartridge to clear the message. For
more information, see the "Replacing supplies" section of the
User's Guide.
Install the indicated imaging kit to clear the message. For more
information, see the "Replacing supplies" section of the User's
Guide.
Replace the waste toner bottle to clear the message.
Remove the toner cartridge, and then install a supported one
to clear the message.
Note: If you do not have a replacement cartridge, then see
the "Ordering supplies" section of the User's Guide or visit
http://support.lexmark.com.
Remove the indicated imaging kit, and then install a supported
one to clear the message.
Note: If you do not have a replacement imaging kit, then
see the "Ordering supplies" section of the User's Guide or
visit http://support.lexmark.com.
Install the missing waste toner bottle to clear the message.
For more information, see the instruction sheet that came
with the supply.
Diagnostic information
84
http://support.lexmark.com
7527
or