Lexmark CX310 Service Manual page 83

Message
Replace all originals if restarting job. Try one or more of the following:
Replace [color] cartridge, 0 estimated
pages remain [88.xy]
Replace [color] cartridge, printer
region mismatch [42.xy]
Replace [type] imaging kit, 0 estimated
pages remain [84.xy]
Replace defective [color] cartridge
[31.xy]
Action
•
Touch Cancel job to clear the message and cancel the scan
job.
•
Touch Scan from automatic feeder to continue scanning
from the ADF immediately after the last successful scan
job.
•
Touch Scan from flatbed to continue scanning from the
scanner immediately after the last successful scan job.
•
Touch Finish job without further scanning to end the last
successful scan job.
•
Touch Restart job to restart the scan job with the same
settings from the previous scan job.
Replace the indicated toner cartridge to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement cartridge, then see
the "Ordering supplies" section of the User's Guide or visit
http://support.lexmark.com.
Install a toner cartridge that matches the region number of
the printer. x indicates the value of the printer region. y
indicates the value of the cartridge region. x and y can have
the following values:
• 0: Global
• 1: United States, Canada
• 2: European Union (EU), European Economic Area (EEA),
Switzerland
•
8: Rest of the world
•
9: Invalid
Notes:
•
The x and y values are the .xy of the error code shown
on the printer control panel.
•
The x and y values must match for printing to continue.
Replace the indicated imaging kit to clear the message and
continue printing. For more information, see the instruction
sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then
see the "Ordering supplies" section of the User's Guide or
visit http://support.lexmark.com.
Replace the defective toner cartridge to clear the message.
For more information, see the instruction sheet that came
with the supply.
Note: If you do not have a replacement toner cartridge,
then see the "Ordering supplies" section of the User's Guide
or visit http://support.lexmark.com.
Diagnostic information
83
7527