Lexmark CX310 Service Manual page 299

3
Remove the screw (A) in the waste toner bottle sensor contact to allow access to the cable cover, and remove the
four screws (B) securing the cable cover.
Notes:
•
The waste toner bottle sensor contact does not need to be unplugged.
• The cable cover is part of the right lower frame FRU.
4
Carefully place the printer on its left side.
5
Remove the three screws (C) securing the lower right frame to the printer.
6
Remove the screw (D) closer to the front of the printer.
Repair information
299
7527