Lexmark CX310 Service Manual page 80

Message
Maintenance kit low [80.xy]
Maintenance kit nearly low [80.xy]
Maintenance kit very low [80.xy]
Memory full [38]
Memory full, cannot print faxes
Memory full, cannot send faxes
Network [x] software error [54]
No analog phone line connected to modem,
fax is disabled.
Action
You may need to order a maintenance kit. For more
information, contact customer support at
http://support.lexmark.com
If necessary, select Continue to clear the message and
continue printing. For non‑touch‑screen printer models, press
OK to confirm.
For more information, contact customer support at
http://support.lexmark.com
If necessary, select Continue to clear the message and
continue printing. For non‑touch‑screen printer models, press
OK to confirm.
You may need to replace the maintenance kit very soon. For
more information, contact customer support at
http://support.lexmark.com
If necessary, select Continue to clear the message and
continue printing. For non‑touch‑screen printer models, press
OK to confirm.
Try one or more of the following:
• From the printer control panel, select Cancel job to clear
the message. For non‑touch‑screen printer models, press
OK to confirm.
• Turn off the printer, wait for about 10 seconds, and then
turn the printer back on.
• Update the network firmware in the printer or print
server. For more information, contact customer support.
From the printer control panel, touch Continue to clear the
message without printing. Held faxes attempt to print after
the printer is restarted.
1
From the printer control panel, touch Continue to clear
the message and cancel the fax job.
2
Try one or more of the following:
• Reduce the fax resolution, and then resend the fax
job.
• Reduce the number of pages in the fax, and then
resend the fax job.
Try one or more of the following:
•
From the printer control panel, touch Continue to
continue printing.
•
Turn off the printer, wait for about 10 seconds, and then
turn the printer back on.
•
Update the network firmware in the printer or print
server. For more information, visit the Lexmark support
Web site at http://support.lexmark.com.
Connect the printer to an analog phone line.
Diagnostic information
80
7527
or your service representative.
or your service representative.
or your service representative.