Jumper Settings For Password Clear And Display Type Select - DFI G586IPV User Manual

Jumper Settings for Password Clear and Display Type
Jumper JP2
Password Clear
If you set a password in the "Password Setting" option and forget your
password. power off your system and set jumper JP2 to On to clear the
password stored in your CMOS. Now power on your system. After your
system has detected the floppy or hard drive, turn it off again and set
JP2 to off.
On: Password Clear
Off: Normal
(Default)
Jumper JP3
Display Type Select
Jumper JP3 sets the display adapter to color or mono. This jumper
must match the type of display adapter installed. If you change your
video adapter, make sure this jumper is changed accordingly.
3 2
1
1
3 2
1-2 On: Color
2-3 On: Mono
(default)
27