DFI G586IPV User Manual page 43

Swap Floppy Drive
Enabled When this option is enabled and the system is booting
from the floppy drive, this option causes the system to
boot from drive B instead of drive A.
Disabled When this option is disabled and the system is booting
from the floppy drive, the system will boot from drive A.
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive is 40 or 80
tracks. 360KB type is 40 tracks while 720KB, 1.2M, 1.44M and 2.88MB
are all 80 tracks. The default value is Enabled.
Enabled BIOS will check whether the floppy disk drive installed is 40
or 80 tracks. 360KB floppy disk drives have 40 tracks while
720KB, 1.2MB 1.44MB and 2.88MB floppy drives all have 80
tracks.
Disabled BIOS will not search for the type of floppy disk drive by track
number. There will not be any warning message if the drive
installed is 360KB.
Boot up NumLock Status
This allows you to determine the default state of the numeric keypad.
The default value is On.
O n The function of the numeric keypad is the number keys.
Off The function of the numeric keypad is the arrow keys.
42