Cli Provides Ascii-Based Interface - ATTO Technology iPBridge 2500C Installation And Operation Manual

7.1 CLI provides ASCII-based interface

The command line interface (CLI) provides access to the ATTO iPBridge Services through a set of
ASCII commands. CLI commands may be entered while in CLI mode.
iPBridge Services provide configuration and
monitoring for the iPBridge. CLI commands may
be entered while in CLI mode or on the
ExpressNAV interface Advanced CLI page.
Note
The recommended management tool for the
iPBridge is ATTO ExpressNAV.
CLI commands are context sensitive and
generally follow a standard format
[Get | Set] Command [Parameter 1 |
Parameter 2]
followed by the return or enter key
CLI commands are case insensitive: you may type
all upper or all lower case or a mixture. Upper and
lower case in this manual and the
for clarification only.
Commands generally have three types of
operation: get, set and immediate.
The get form returns the value of a parameter or
setting and is an informational command.
Exhibit 7.1-1 Symbols, typefaces and abbreviations used to indicate functions and elements of the
command line interface used in this manual.
Command conventions
Symbol Indicates
[ ] Required entry
< > Optional entry
| pick one of
... Ellipses, repetition of preceding item
\n end of line
- a range (6 – 9 = 6, 7, 8, 9)
35
ATTO Technology Inc. iPBridge Installation and Operation Manual
Responses to get commands are specified in the
Results field for each command, followed by
Ready
The set form is an action that changes the value of
a parameter or configuration setting. It may
require a
restart of the system before it is implemented. The
restart can be accomplished as part of the
SaveConfiguration
separate
of set commands may be issued before the
SaveConfiguration
Responses to set commands are either an error
message or
must use a
finalize the set command.
screen are
help
asks if you want to restart the system or not.
Set commands which do not require a
SaveConfiguration
immediate commands, are immediately executed.
Responses to Immediate commands are either an
error message or data results followed by Ready.
For an example of a typical CLI command and
response, see Exhibit 7.1-3 on page 38.
Symbol
Boldface words must be typed as they appear
Italicized words Arguments which must be replaced by
mp0
Dp
sb
sl
st
.
SaveConfiguration
command or by using a
t command. A number
FirmwareRestar
command.
. The asterisk indicates you
Ready. *
SaveConfiguration
SaveConfiguration
command, defined as
Indicates
whatever they represent
Management port
Data port (0<= Dp <= 1)
SCSI bus number (0<= sb <= 1)
SCSI LUN ID (0 <= sl <= 7)
SCSI target ID (0 <= st <= 15)
command and a
command to