Uploading A Gtl License File; Activating The Gtl License File - Huawei AR1200 Series User Configuration Manual

Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration
No.
1

9.2.2 Uploading a GTL License File

The GTL license file that has been applied for can be activated only after the file has been
uploaded to the storage medium on a device.
Context
Before uploading a GTL license file, run the dir command to check that the storage media has
adequate free space to store the GTL license file.
Procedure
Step 1 Run:
dir *.dat
Check whether the GTL license file is saved to flash:.
If the GTL license file is not saved, upload the GTL license file to flash:.
Step 2 Run:
copy source-filename destination-filename
The GTL license file is uploaded to flash:.
----End

9.2.3 Activating the GTL License File

After activating the GTL license, you are allowed to operate the corresponding service modules.
Procedure
l
l
Issue 04 (2012-05-15)
Data
GTL license file name
NOTE
A user who wants to upgrade a GTL license must run the license revoke command to obtain an invalidation
code, and then use this code to apply to Huawei for a new GTL license. This user also needs to load the
new GTL license file to the main control board.
Activate the GTL license for the first time.
1. Run:
license active file-name
The GTL license is activated and you obtained permission.
NOTE
If you use the GTL license for the first time, buy the GTL license file from Huawei.
Upgrade the GTL license.
1. Run:
license revoke
The GTL license invalidation code is returned.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Upgrade and Maintenance
192